Thermal Imaging camera for Phone Motherboard PCB circuit boards Detection

Using the thermal imaging camera to find PCB short. for the electronic circuit board inspection and test quickly, make your repair work simple and efficient, widely used in mobile phone repair, electric board repair.

The PCB thermal tester is a special device used for circuit board thermal field testing. In the era of rapid technological development, smart devices are becoming more and more popular, and smart devices have higher and higher requirements for low power consumption and low heat generation. However, thermal analyzers can provide a large amount of thermal simulation data during the design phase, which is a hardware design. An indispensable tool; at the same time, when the electronic product has some problem, such as circuit leakage and short circuit board, it can be reflected by abnormal temperature rise. Using a thermal imaging camera, you can quickly find the location of the leakage or short circuit. To achieve the purpose of locating the fault point and quickly repairing; the effect of other components, such as power modules and other components, detects overheating protection capabilities.

Features;

• Thermal imaging resolution 260*200, 25Hz, to ensure high-quality image;
• The temperature measurement range of the thermal imaging analyzer is -10~120℃, which is not easy to exceed the temperature measurement range and cause data errors;
• In the 3D thermal field image, the pulse change caused by the small current leakage can quickly find the leakage point;
• Quickly find the high-temperature area of the circuit board, thereby tracking the high current leakage area;
• Automatically mark the PCB high-temperature area caused by the short circuit, only need to fine-tune the temperature range to get the highest temperature point of the circuit board;
• For comparative evaluation of smart devices, you can use the “dual-board mode” to view the temperature of different devices after testing at the same time;
• Rotate the multi-adjustment knob, the lens can be adjusted forward and backward freely and tilted, and the working distance can be freely converted from 20mm to 2000mm;
• A USB C cable can transfer the analyzer screen to the computer. Open the analysis software to work, and beginners can easily get started.

Specification of the Thermal Imaging camera PCB inspection.